Introduction of Ship Rubber Airbag
Florescence ship rubber airbags can be used to launch and land a ship up to 100,000DWT. Comparing to the traditional slipway launching method, the ship rubber airbags are much convenient, because ship airbag can launch a ship at any seaside, so there's no need to worry about the construction of launching facilities; besides, the marine airbag need little maintenance and can be used repeatedly. Need no more than air compressors, winches and ropes.
To recommend you best ship rubber airbag size
Before to provide suitable airbag size and quantity for your ship, please provide below information:
1.Ship length,width and weight.
2.Type of ground ship is built on? (Dirt, concrete, etc.)
3.Type of ship?
4.Depth in meters of the water where the ship first enters the water?
5.What's the angle degree of slipway? (Land, not under water)
6.Please provide the low/high tide schedule at site.
7.The working height? (The block stand height under the ship)
8.Distance from bottom of propeller to the water level?
9.Distance from back of ship (in dry dock) to the water entry point?
*If possible, please provide photos of the launch area.
Advantages of ship rubber airbag
1.Superior quality raw material
The raw material of our ship rubber airbags are natural rubber and nylon cord fabric.
The gel content of the rubber is very high and the thickness of the ship airbags is made evenly.
Because of the good flexibility of the rubber and the good toughness of the nylon cord fabric,the airbags can play a role of a buffer for the ship .The airbags have strong wear resistance and endurance anti-aging ability, so have long service life.
2.The whole winding technology
Ship rubber airbags are made by whole winding technology.The body of the airbags do not have any joint, just like a silkworm cocoon.So the airbags have good tightness when inflatable and are not easy to blew out.
3.Advanced framework design