Add: Building 13, MAX Technology Park, No. 151 Wangjiang Road,
West Coast New District, Qingdao, China.
Tel: +86-532-86760999 Ext: 802
Mob: +8618205321693
E-mail: info@marinefenderairbag.com

Salvage Airbag For Ship Introduction:
Marine airbags are widely used for ship launching and docking in shipyards, specially medium and small shipyards alongside rivers and seasides in Asian and American countries. Ship airbags are often called ship launching airbags that indicate the most popular application of these heavy duty airbags is for ship launching. It is estimated that more than 80 percent new built ships who's DWT below 60,000 are launched by airbags.
Launching with rubber airbags are flexible. Any flat ground with a little declining angle can be taken as a slip way.
Airbags can sucessfully launch a ship even on a bank 1 or 2 meters over water level.



Florescence brand pneumatic airbags mainly export to Southeast Asia and the Middle East countries with good quality and performance. Such as Indonesia Turkey and Singapore, etc. There are so many shipyards in these countries. Because of professional products, first-class service, we have won the trust and cooperation of our customers.




Not only do we use dock airbags, but also we know how to protect them.
Ship Rubber Airbag Safety Precautions
Airbag Usage Notes:
·Overpressure Control:
Strictly control the operating pressure, overpressure is forbidden.
·The Landing Slipway Requirements:
The landing gtound should be ground or cement concrete, according to the tonage of different ships.
·Avoid Sharp Objects:
Make sure no projects on the slipway and make sure the slipway is smooth and clean during operation, in case of airbags damage.
· Avoid Distortion And Overweight:
Avoid distortion in the length direction during rolling and avoid overweight load after das charging
Storage of ship rubber airbag:
1.The airbags should be maintained in a dry ventilated room and be protected from light .
2.The airbags should be in a relaxed condition free from tension ,compression or other deformation.
3.The airbags should be kept away from any heat source.
4.The airbags should be protect from acids, alkalis, oils or organic solve.
Different sizes of Airbags.
Advantages of boat rubber airbags:
1.Long service life can use over 6-8 years
2.Wear resistance and anti aging
3.ISO, BV,CCS certificated
4.Harmless to the environment. Time & money saving.
5.Provide repair kit and on site instruction




|
Diameter(m)
|
From 0.6-2.8m
|
|
Effective Length(EL)
|
From 5.0 to 24.0m
|
|
Total Length(TL)
|
From 7.0m to 26.0m
|
|
Standard Number of Layers
|
Usually 3-10 layers
|
|
TYPE
|
D=0.8m
|
D=1.0m
|
D=1.2m
|
D=1.5m
|
D=1.8m
|
D=2.0m
|
|
FL-3TYPE
|
0.13MPA
|
0.10MPA
|
0.09MPA
|
0.07MPA
|
0.06MPA
|
0.05MPA
|
|
FL-4TYPE
|
0.17MPA
|
0.13MPA
|
0.11MPA
|
0.09MPA
|
0.08MPA
|
0.07MPA
|
|
FL-5TYPE
|
0.21MPA
|
0.17MPA
|
0.14MPA
|
0.11MPA
|
0.09MPA
|
0.08MPA
|
|
FL-6TYPE
|
0.25MPA
|
0.20MPA
|
0.17MPA
|
0.13MPA
|
0.11MPA
|
0.10MPA
|
Hot Tags: salvage airbag for ship, China, suppliers, manufacturers, factory, price, seaplane fender, hovercraft fender, pneumatic fender for cargo ship, vessel fender, ski boat fender, pneumatic fender manufacturer
Previous: Marine Airbags For Ship Launching
Next: No Information
Add: Building 13, MAX Technology Park, No. 151 Wangjiang Road,
West Coast New District, Qingdao, China.
Tel: +86-532-86760999 Ext: 802
Mob: +8618205321693
E-mail: info@marinefenderairbag.com